This Serial CAN-BUS provides your Arduino or others MCU with the capability to communication to CAN-BUS, such as hacking your vehicle. CAN-BUS is a common industrial bus because of its long travel distance, medium communication speed and high reliability. This Serial CAN-BUS module is based on MCP2551andMCP2515, which can provide speed up to 1Mb/s. There's Grove connect as well as Grove cable included in the kit, which allows connect the module to your Arduino easily, click to get more about Seeed Grove System.


Uart to CAN-BUS communication

AT command

Up to 115200 Uart baud rate (default 9600)

Up to 1Mb/s CAN-BUS baud rate

TX and RX led indicator

4pin Grove connector

3.3V working voltage

Easy-to-use Arduino library

Small size

Size and Hardware Overview

Serial CAN-BUS Module overview.png

4 pin 2.0mm Grove Connector

Power and status led indicator

Send and Recv led indicator

3.5mm terminal to connect to CAN Bus (CAN_H & CAN_L)

120Ω registor, default connected, if you don't need you cut this pad with a box cutter.


How to use